Novotechnik Introduces Vert-X 2800 Series of Sensors

novotechnik-logo1Novotechnik has introduced the Vert-X 2800 Series of sensors that measure angular position. These sensors convert rotational angle into an analog or digital output – depending on version.

novo_buUsers can select a stock part to simply measure angle or they can be configured, using a tool connected to your PC called Easy Adapt, to be application-specific. Possible configurations include start- and end-angles for less than 360° maximum range, index point, cw or ccw indication, calibration settings and non-linear curves.

Vert-X 2800 Series sensors are available in single and fully redundant versions. Measurement range is 0 to 360° with repeatability of 0.1°. Available analog outputs are 4 to 20 mA, 0.1 to 10 V, 10 to 90% of supply voltage and 5 to 95% of supply voltage. Digital output choices are SPI or PWM. Up to two programmable TTL-level switches are options.

Other key Vert-X 2800 Series specifications include housing base diameter of 28 mm, up to 14-bit resolution and linearity to ±0.1 % of measurement range.  The sensors are sealed to IP 65, life is ≥ 50 million movements and MTTF is over 100 years.

These sensors are ideal for industrial, medical and off-highway vehicle applications with an operating temperature range of -40 to +85°C and high immunity to emissions –meeting or exceeding five EN 61000 and two EN 55000 standards.

For more information, visit Novotechnik website.

Leave a Reply

Your email address will not be published. Required fields are marked *