Delcam to Preview FeatureCAM 2008 at EASTEC
 BIRMINGHAM,
UK, March 13, 2007 - Delcam will preview new five-axis machining options in
both its FeatureCAM and PowerMILL CAM systems at the
EASTEC exhibition to be held in West Springfield, Massachusetts from
22nd to 24th May. The new version of FeatureCAM will include support for
continuous five-axis machining for the first time, while the PowerMILL
preview will highlight new automated functionality for machining blades,
blisks and impellors.
Delcam’s FeatureCAM 2008 will include support for continuous five-axis
machining
FeatureCAM 2008 will offer a variety of methods for controlling the tool
axis in five-axis machining. The user will be able to set a specific lead
and/or lean angle – the lead angle is measured in the cutting direction; the
lean angle at right angles to the cutting direction. This can be done either
to access areas unable to be reached with three-axis machining or to give
better cutting conditions. Alternatively, the tool angle can be set in an
orientation either to or from a point or to or from a line.
Any three-axis toolpath generated in FeatureCAM can be converted to a
five-axis toolpath by using automatic collision avoidance to change the tool
axis when collisions might occur. The software automatically tilts the
cutter away from the obstacle by the specified tolerance and then returns
the cutting angle to the value set for the overall toolpath once the
obstacle has been cleared. Various choices are available to control the
direction in which the tool is tilted.
Other new options include five-axis trimming and swarf machining. These
techniques are used for the finishing of composite components and vacuum
formed parts, and for machining pockets in aerospace structures.
Five-axis drilling is also supported. This new functionality, coupled
with the advanced feature-recognition in FeatureCAM, makes it possible to
create drilling programs in seconds for multiple hole types and sizes,
oriented in a variety of directions.
The new automated functionality in PowerMILL CAM will allow much faster
programming of the machining of blisks and impellors. Typically, the new
option will allow even complex blisks and impellors to be programmed in
around 30 minutes, compared with the many hours of work that would have been
needed previously.
The three type of toolpath needed to machine a blade – a roughing
toolpath to remove the bulk material, plus separate finishing toolpaths for
the blade and the hub – will be produced in a single calculation. A warning
is given automatically if the cutter chosen for roughing will not remove
sufficient material so that finishing can be undertaken safely.
To further speed the calculation times, if the blades are evenly spaced,
PowerMILL will automatically count the number of blades and produce a
complete set of toolpaths in a single operation. When the blades have
different spacings, toolpaths must first be produced for a single blade and
then copied around the hub at the appropriate angles.
---------
If news like this is important to you, sign up for our TenLinks Daily at http://www.tenlinks.com/news/sub_unsub.htm.
Related News
May 6 - Delcam Announces JR Automation as 25,000th Customer
Apr 28 - Delcam to Preview DentCAD at UK Dental Show
Apr 1 - Delcam Appoints Clive Martell as Operations Director
Mar 19 - Delcam FY07 Revenue Up 11% to 29.7M Pounds
Feb 22 - Delcam Launches Online PowerMILL 8 Release Center
Feb 14 - Delcam to Launch PowerINSPECT v5 at Control Exhibition
Jan 9 - Delcam Adds Components Library in Toolmaker CAD
Jan 4 - Delcam Nominated for MIA 'Service to Industry' Award
Jan 3 - Delcam Adds 3 Meter Mill-Turn to Tooling Division
Dec 13 - South Africa's VMP Team Audi Partners With Delcam
Dec 11 - Delcam Ships ArtCAM Express for Artist
Dec 6 - Delcam to Launch ArtCAM JewelSmith at Spring Fair 2008
Dec 3 - Delcam Offers Free CAD Training on iTunes
Nov 29 - South Africa's ISIQU Uses PowerMill to Replace Bones
Nov 2 - Delcam to Launch ArtCAM Express, Insignia, Pro at Viscom
Oct 30 - Delcam FeatureCAM Gets SolidWorks Certification
Oct 26 - Delcam Links PowerMILL Directly to VERICUT
Oct 25 - French Firm Laroche Used Delcam for 20 Years
Oct 16 - Delcam Module Claims Faster Programming of Blisk, Impellers
Oct 10 - Delcam Appoints Nanjing Unigenius For China CADCAM Sales
Sep 10 - Delcam Celebrates 20 Years of Sales in Japan
Aug 28 - Delcam to Launch Entry Level ArtCAM at Viscom Germany
Aug 24 - Delcam Reports Record Half-Year Sales of $29M
Aug 14 - Delcam Designer to be Launched for ArtCAM Users
Aug 13 - Delcam to Show 5 Axis Options at Great Lakes Show
Aug 9 - Delcam Releases ArtCAM Pro 2008 for Artistic Applications
Aug 3 - Delcam Releases FeatureCAM 2008
Jul 31 - UK's Cgi to Use Delcam PowerMILL for Mecof Machine
Jul 10 - 80 Attend Delcam FeatureCAM Sales Partners Meeting
Jul 5 - Delcam Offers Free PowerSHAPE-e for View, Comment
Jun 25 - Delcam Seeks More Developers at Birmingham HQ
Jun 15 - Delcam FeatureCAM Certified for Autodesk Inventor 2008
Jun 13 - Delcam to Launch New PowerMILL CAM at EMO
Jun 8 - Delcam Appoints Chris Edwards as UK Sales Director
Jun 1 - Delcam Updates DentMILL for Automated Machining of Caps
May 25 - Delcam Introduces CRISPIN OrthoDesign Products for...
May 24 - Delcam #1 'Specialist Supplier' and in 'Mold, Tool and Die'
May 21 - Delcam to Launch ArtCAM Insignia Update at AWFS
May 17 - Delcam Appoints New Chairman, Non-Executive Director
May 7 - Delcam to Show PowerINSPECT for Renishaw REVO at Control
May 3 - Delcam Launches PartMaker 8
May 3 - Delcam Adds Multi-Axis Option to PowerINSPECT OMV
Apr 27 - Delcam Sets Record with Q1 Sales of 8M Pounds
Apr 25 - Renishaw Invests 6.1M Pounds in Delcam
Apr 20 - Delcam Adds On-Line Forum for FeatureCAM
Apr 18 - Delcam India Opens Head Office in Pune
Apr 13 - Delcam to Launch ArtCAM Insignia 2008 at LIGNA Exhibition
Apr 12 - SEACAM to Launch Delcam PartMaker CAM in Brazil
Apr 09 - Delcam Offers Free CAD Viewer at Plastics Innovations Show
Apr 04 - Delcam Promotes Roger Onions to BizDev Director
Mar 30 - Delcam FY06 Sale Up 14% to 26.7M Pounds, Profit Up 9.6%
Mar 23 - Ted Tanouye Uses Delcam FeatureCAM for Bike Design
Mar 21 - Delcam to Launch 3D Modeling Add-On for ArtCAM JewelSmith
Mar 20 - Delcam to Launch PartMaker in Germany at Turning Days
Mar 13 - Delcam to Preview FeatureCAM 2008 at EASTEC
Mar 6 - Delcam Partner TCT to Launch PartMaker CAM in Mexico
Mar 6 - 40% Growth Wins Vizion Delcam Sales Partner Award
Feb 23 - Delcam Ships Design-Only Versions of ArtCAM Pro, JewelSmith
Feb 21 - Delcam Sales Partners Celebrate Record Results
Feb 13 - Cimatron's Ning Jingbo Joins Delcam China as Sales Director
Feb 8 - Delcam's ArtCAM Forum Reaches 5,000 Members
Feb 6 - Delcam December 2006 Sales Up 11% to $5.6M
Jan 30 - Delcam Consolidates North American Sales Organization
Jan 24 - Delcam Releases ArtCAM Insignia 4 for Engraving, Routing
Jan 16 - Delcam to Show its CAM Range at WESTEC
Jan 12 - Delcam Acquires Footwear CADCAM Provider Crispin
Source: Material used in press releases is often supplied by external
sources and used as is.
|
