Delcam to Launch PowerINSPECT v5 at Control Exhibition
 BIRMINGHAM,
UK, Feb 14, 2008 - Delcam will launch Version 5 of its PowerINSPECT software
on stand 3110 at the
Control exhibition to be held in Stuttgart, Germany, from 22nd to 25th
April. This new release of the world’s most successful hardware-independent
inspection software includes support for five-axis scanning with Renishaw’s
REVO probe, the ability to use multiple alignments within parts or
assemblies, improved CMM connectivity and more flexible report generation.
PowerINSPECT supports Renishaw’s REVO five-axis probe
PowerINSPECT 5 is believed to be the first inspection software to support
Renishaw’s REVO for the verification of both geometric and free-form shapes
on all major makes of CMM. The combined solution offers faster and more
accurate measurement of feature-rich parts, such as powertrain components,
and complex doubly-curved surfaces, including those found in aerofoil and
turbine blades.
As the five-axis REVO head is much lighter and more dynamic than the CMM,
with a significantly better frequency response, it is able to quickly follow
changes in the part geometry much more quickly. In addition, five-axis
scanning minimizes dynamic errors caused by the inertial forces that affect
the moving mass of the CMM structure.
The new PowerINSPECT release incorporates proven five-axis simulation and
collision avoidance technology from Delcam’s PowerMILL CAM system. As a
result, users can be confident that the inspection routines will operate
safely and efficiently.
PowerINSPECT’s new ability to use multiple alignments within a single
part will allow independent verification of distinct areas within the
component. This will make it simpler to identify the source of any error in
a faulty example and so make it quicker and easier to rectify the problem.
Multiple alignments can also be important when checking assemblies of
parts. They can be used to discover whether the error is in an individual
component, and, if so, in which one, or whether the problem has resulted
from an inaccuracy in the way in which the parts have been put together.
The introduction into PowerINSPECT of I++ technology will make it easier
to add the software to new hardware, especially for companies that use a
variety of different devices. I++ is the standard communication format for
CMMs and is supported by all major equipment manufacturers.
PowerINSPECT’s easy-to-understand reporting has always been one of the
software’s most popular features. With the new release, users have been
given more control over the way in which the results are displayed. The
previous highly-automated reporting methods are still available but users
are now able to customize reports more easily. For example, the positions
and contents of results labels can be adjusted to highlight the most
important measurements.
For more information visit at
www.delcam.com.
---------
If news like this is important to you, sign up for our TenLinks Daily at http://www.tenlinks.com/news/sub_unsub.htm.
Related News
May 22 - Delcam Signs Korea's Doosan to Support Products Use
May 20 - Delcam Opens 2 Training Centers in Ukraine
May 6 - Delcam Announces JR Automation as 25,000th Customer
Apr 28 - Delcam to Preview DentCAD at UK Dental Show
Apr 1 - Delcam Appoints Clive Martell as Operations Director
Mar 19 - Delcam FY07 Revenue Up 11% to 29.7M Pounds
Feb 22 - Delcam Launches Online PowerMILL 8 Release Center
Feb 14 - Delcam to Launch PowerINSPECT v5 at Control Exhibition
Jan 9 - Delcam Adds Components Library in Toolmaker CAD
Jan 4 - Delcam Nominated for MIA 'Service to Industry' Award
Jan 3 - Delcam Adds 3 Meter Mill-Turn to Tooling Division
Dec 13 - South Africa's VMP Team Audi Partners With Delcam
Dec 11 - Delcam Ships ArtCAM Express for Artist
Dec 6 - Delcam to Launch ArtCAM JewelSmith at Spring Fair 2008
Dec 3 - Delcam Offers Free CAD Training on iTunes
Nov 29 - South Africa's ISIQU Uses PowerMill to Replace Bones
Nov 2 - Delcam to Launch ArtCAM Express, Insignia, Pro at Viscom
Oct 30 - Delcam FeatureCAM Gets SolidWorks Certification
Oct 26 - Delcam Links PowerMILL Directly to VERICUT
Oct 25 - French Firm Laroche Used Delcam for 20 Years
Oct 16 - Delcam Module Claims Faster Programming of Blisk, Impellers
Oct 10 - Delcam Appoints Nanjing Unigenius For China CADCAM Sales
Sep 10 - Delcam Celebrates 20 Years of Sales in Japan
Aug 28 - Delcam to Launch Entry Level ArtCAM at Viscom Germany
Aug 24 - Delcam Reports Record Half-Year Sales of $29M
Aug 14 - Delcam Designer to be Launched for ArtCAM Users
Aug 13 - Delcam to Show 5 Axis Options at Great Lakes Show
Aug 9 - Delcam Releases ArtCAM Pro 2008 for Artistic Applications
Aug 3 - Delcam Releases FeatureCAM 2008
Jul 31 - UK's Cgi to Use Delcam PowerMILL for Mecof Machine
Jul 10 - 80 Attend Delcam FeatureCAM Sales Partners Meeting
Jul 5 - Delcam Offers Free PowerSHAPE-e for View, Comment
Jun 25 - Delcam Seeks More Developers at Birmingham HQ
Jun 15 - Delcam FeatureCAM Certified for Autodesk Inventor 2008
Jun 13 - Delcam to Launch New PowerMILL CAM at EMO
Jun 8 - Delcam Appoints Chris Edwards as UK Sales Director
Jun 1 - Delcam Updates DentMILL for Automated Machining of Caps
May 25 - Delcam Introduces CRISPIN OrthoDesign Products for...
May 24 - Delcam #1 'Specialist Supplier' and in 'Mold, Tool and Die'
May 21 - Delcam to Launch ArtCAM Insignia Update at AWFS
May 17 - Delcam Appoints New Chairman, Non-Executive Director
May 7 - Delcam to Show PowerINSPECT for Renishaw REVO at Control
May 3 - Delcam Launches PartMaker 8
May 3 - Delcam Adds Multi-Axis Option to PowerINSPECT OMV
Apr 27 - Delcam Sets Record with Q1 Sales of 8M Pounds
Apr 25 - Renishaw Invests 6.1M Pounds in Delcam
Apr 20 - Delcam Adds On-Line Forum for FeatureCAM
Apr 18 - Delcam India Opens Head Office in Pune
Apr 13 - Delcam to Launch ArtCAM Insignia 2008 at LIGNA Exhibition
Apr 12 - SEACAM to Launch Delcam PartMaker CAM in Brazil
Apr 09 - Delcam Offers Free CAD Viewer at Plastics Innovations Show
Apr 04 - Delcam Promotes Roger Onions to BizDev Director
Mar 30 - Delcam FY06 Sale Up 14% to 26.7M Pounds, Profit Up 9.6%
Mar 23 - Ted Tanouye Uses Delcam FeatureCAM for Bike Design
Mar 21 - Delcam to Launch 3D Modeling Add-On for ArtCAM JewelSmith
Mar 20 - Delcam to Launch PartMaker in Germany at Turning Days
Mar 13 - Delcam to Preview FeatureCAM 2008 at EASTEC
Mar 6 - Delcam Partner TCT to Launch PartMaker CAM in Mexico
Mar 6 - 40% Growth Wins Vizion Delcam Sales Partner Award
Feb 23 - Delcam Ships Design-Only Versions of ArtCAM Pro, JewelSmith
Feb 21 - Delcam Sales Partners Celebrate Record Results
Feb 13 - Cimatron's Ning Jingbo Joins Delcam China as Sales Director
Feb 8 - Delcam's ArtCAM Forum Reaches 5,000 Members
Feb 6 - Delcam December 2006 Sales Up 11% to $5.6M
Jan 30 - Delcam Consolidates North American Sales Organization
Jan 24 - Delcam Releases ArtCAM Insignia 4 for Engraving, Routing
Jan 16 - Delcam to Show its CAM Range at WESTEC
Jan 12 - Delcam Acquires Footwear CADCAM Provider Crispin
Source: Material used in press releases is often supplied by external
sources and used as is.
|
