ANSYS Reports Record Q1 Revenue $88M, with $16M Profit
SOUTHPOINTE,
Pennsylvania, May 3, 2007 - ANSYS, Inc. (Nasdaq: ANSS), a global innovator of
simulation software and technologies designed to optimize product
development processes, today announced a new Company record for first
quarter non-GAAP operating results.
"We are very excited to start off 2007 with record first quarter
operating results. These results are the outcome of the persistent
dedication and efforts of the global ANSYS team and demonstrate our
continued progress in executing on our long-term vision," stated Jim Cashman,
ANSYS President and CEO. "We entered into this fiscal year with enthusiasm
and momentum, and we continue to be pleased with the measurable progress
against our integration plans for the Fluent acquisition, particularly as we
have reached another important milestone with the one year anniversary this
week."
ANSYS' first quarter 2007 financial results are presented below. The non-GAAP
results exclude the income statement effects of stock-based compensation,
purchase accounting for deferred revenue and acquisition-related
amortization of intangible assets.
Non-GAAP and GAAP results reflect:
- Total non-GAAP revenue of $89.6 million in the first quarter of 2007
and total GAAP revenue of $87.9 million in the first quarter of 2007 as
compared to $46.0 million in the first quarter of 2006;
- A non-GAAP operating profit margin of 42.6% in the first quarter of
2007 as compared to 43.4% in the first quarter of 2006; a GAAP operating
profit margin of 30.5% in the first quarter of 2007 as compared to 38.7%
in the first quarter of 2006;
- Non-GAAP net income of $23.5 million in the first quarter of 2007 as
compared to $14.5 million in the first quarter of 2006; GAAP net income
of $16.2 million in the first quarter of 2007 as compared to GAAP net
income of $12.9 million in the first quarter of 2006; and
- Non-GAAP diluted earnings per share of $0.58 in the first quarter of
2007 as compared to $0.42 in the first quarter of 2006; GAAP diluted
earnings per share of $0.40 in the first quarter of 2007 as compared to
GAAP diluted earnings per share of $0.38 in the first quarter of 2006.
The Company's GAAP results reflect stock-based compensation charges of
approximately $2.2 million ($1.8 million after tax) or $0.04 diluted
earnings per share for the first quarter of 2007.
The non-GAAP financial results highlighted above, and the non-GAAP
financial outlook for 2007 discussed below, represent non-GAAP financial
measures. A reconciliation of these measures to the appropriate GAAP
measures, for the three months ended March 31, 2007 and 2006, and for the
2007 financial outlook, is included in the condensed financial information
included in this release.
Continuing his comments, Cashman noted, "We remain committed to provide
an unparalleled array of world-class engineering simulation solutions as
demonstrated by the recent delivery of new product releases to the market,
which included ANSYS 11.0. This release represents the continued advancement
of our integrated, best-in-class computer-aided engineering (CAE)
functionality, including advanced analysis, meshing, optimization,
multiphysics and multibody dynamics."
Cashman concluded, "Looking ahead, our first quarter results lay the
groundwork for continued momentum in 2007, and as such, we are increasing
our outlook for the year. We believe that we are well positioned to invest
and capitalize on the global market opportunities for growth, leveraging our
extensive customer base, strategic vision, technology leadership, and solid
business model, to drive technological and operational excellence."
Management's Remaining 2007 Financial Outlook
The Company has provided its 2007 revenue and earnings per share guidance
below. The revenue and earnings per share guidance is provided on both a
GAAP basis and a non-GAAP basis. Non-GAAP revenue and non-GAAP diluted
earnings per share exclude charges for stock-based compensation, as well as
the income statement effects of purchase accounting for deferred revenue and
acquisition- related amortization of intangible assets.
As required by SFAS No. 123R and guidance issued by the Securities and
Exchange Commission, effective January 1, 2006, the Company records expenses
and tax benefits related to stock-based compensation. As a result, the GAAP
estimates for earnings per share provided below reflect the anticipated
impact of stock-based compensation. The Company issues both nonqualified and
incentive stock options; however, incentive stock options comprise a
significant portion of outstanding stock options. The tax benefits
associated with incentive stock options are unpredictable, as they are
predicated upon an award recipient triggering an event that disqualifies the
award and which then results in a tax deduction to the Company. GAAP
requires that these tax benefits be recorded at the time of the triggering
event. The triggering events for each option holder are not easily
projected. In order to estimate the tax benefit related to incentive stock
options, the Company makes many assumptions and estimates, including the
number of incentive stock options that will be exercised during the period
by U.S. employees, the number of incentive stock options that will be
disqualified during the period and the fair market value of the Company's
stock price on the exercise dates. Each of these items is subject to
significant uncertainty. Additionally, a significant portion of the tax
benefits related to disqualified incentive stock options is accounted for as
an increase to equity (additional paid-in capital) rather than as a
reduction in income tax expense, especially in the periods most closely
following the adoption date of SFAS No. 123R. Although all such benefits
continue to be realized through the Company's tax filings, this accounting
treatment has the effect of increasing tax expense and reducing net income.
For example, the Company realized a tax benefit of $1.3 million during the
first quarter of 2007 related to disqualified incentive stock options;
however, only $99,000 of such amount was recorded as a reduction in income
tax expense. Because there are significant limitations in estimating the
impact of SFAS No. 123R, including those discussed above, the actual impact
of stock-based compensation on GAAP earnings per share may differ materially
from the estimated amounts included in the guidance below.
Impact of Adoption of FIN 48
Effective January 1, 2007, the Company adopted FASB Interpretation No.
(FIN) 48, "Accounting for Uncertainty in Income Taxes" - an Interpretation
of SFAS No. 109, "Accounting for Income Taxes." Pursuant to FIN 48, ANSYS
identified, evaluated and measured the amount of income tax benefits to be
recognized for all of its income tax positions. The adoption of FIN 48
resulted in an increase to income tax expense in the first quarter of 2007
of $584,000 and a corresponding adverse impact on the effective tax rate of
2.3%. Income taxes as a percentage of GAAP earnings before income taxes were
approximately 37% in the first quarter of 2007 as compared to 34% in the
first quarter of 2006. This rate fluctuates over time based on the income
tax rates in the various jurisdictions in which the Company operates, and
based on the level of profits in those jurisdictions.
Second Quarter 2007 Guidance
The Company currently expects the following for the quarter ending June
30, 2007:
- GAAP revenue in the range of $87 - $89 million
- Non-GAAP revenue in the range of $87 - $89 million
- GAAP diluted earnings per share of $0.35 - $0.38
- Non-GAAP diluted earnings per share of $0.52 - $0.53
Fiscal Year 2007 Guidance
The Company currently expects the following for the fiscal year ending
December 31, 2007:
- GAAP revenue in the range of $363 - $366 million
- Non-GAAP revenue in the range of $365 - $368 million
- GAAP diluted earnings per share of $1.46 - $1.53
- Non-GAAP diluted earnings per share of $2.14 - $2.17
Non-GAAP revenue and diluted earnings per share are supplemental
financial measures and should not be considered as a substitute for, or
superior to, revenue and diluted earnings per share determined in accordance
with GAAP.
ANSYS will hold a conference call at 10:30 a.m. Eastern Time on May 3,
2007 to discuss first quarter results. To participate in the live conference
call, dial 913-312-1264 or 888-802-2278 and enter the passcode "ANSYS" or
"26797". The call will be recorded and a replay will be available
approximately two hours after the call ends. The replay will be available
for one week by dialing 719-457-0820 or 888-203-1112 and entering the
passcode "ANSYS" or "26797". The archived webcast can be accessed, along
with other financial information, on ANSYS' website at
http://www.ansys.com/corporate/investors.asp.
Use of Non-GAAP Measures
The Company provides non-GAAP revenue, non-GAAP operating income, non-GAAP
operating profit margin, non-GAAP net income and non-GAAP diluted earnings
per share as supplemental measures to GAAP regarding the Company's
operational performance. These financial measures exclude the impact of
certain items and, therefore, have not been calculated in accordance with
GAAP. A detailed explanation of each of the adjustments to such financial
measures is described below. This press release also contains a
reconciliation of each of these non-GAAP financial measures to its most
comparable GAAP financial measure.
Management uses non-GAAP financial measures (a) to evaluate the Company's
historical and prospective financial performance as well as its performance
relative to its competitors, (b) to set internal sales targets and spending
budgets, (c) to allocate resources, (d) to measure operational profitability
and the accuracy of forecasting, (e) to assess financial discipline over
operational expenditures and (f) as an important factor in determining
variable compensation for management and its employees. In addition, many
financial analysts that follow our Company focus on and publish both
historical results and future projections based on non-GAAP financial
measures. We believe that it is in the best interest of our investors to
provide this information to analysts so that they accurately report the non-
GAAP financial information. Moreover, investors have historically requested
and the Company has historically reported these non-GAAP financial measures
as a means of providing consistent and comparable information with past
reports of financial results.
While management believes that these non-GAAP financial measures provide
useful supplemental information to investors, there are limitations
associated with the use of these non-GAAP financial measures. These non-GAAP
financial measures are not prepared in accordance with GAAP, are not
reported by all of the Company's competitors and may not be directly
comparable to similarly titled measures of the Company's competitors due to
potential differences in the exact method of calculation. The Company
compensates for these limitations by using these non-GAAP financial measures
as supplements to GAAP financial measures and by reviewing the
reconciliations of the non-GAAP financial measures to their most comparable
GAAP financial measures.
The adjustments to these non-GAAP financial measures, and the basis for
such adjustments, are outlined below:
Purchase accounting for deferred revenue. As announced on May 1, 2006,
ANSYS acquired Fluent Inc. in a series of mergers. In accordance with the
fair value provisions of EITF 01-3, "Accounting in a Business Combination
for Deferred Revenue of an Acquiree," acquired deferred revenue of
approximately $31.5 million was recorded on the opening balance sheet, which
was approximately $20.1 million lower than the historical carrying value.
Although this purchase accounting requirement has no impact on the Company's
business or cash flow, it adversely impacts the Company's reported GAAP
software license revenue primarily for the first twelve months post-
acquisition. In order to provide investors with financial information that
facilitates comparison of both historical and future results, the Company
has provided non-GAAP financial measures which exclude the impact of the
purchase accounting adjustment. The Company believes that this non-GAAP
financial adjustment is useful to investors because it allows investors to
(a) evaluate the effectiveness of the methodology and information used by
management in its financial and operational decision-making and (b) to
compare past and future reports of financial results of the Company as the
revenue reduction related to acquired deferred revenue will not recur when
related annual lease licenses and software maintenance contracts are renewed
in future periods.
Amortization of intangibles from acquisitions and its related tax impact.
The Company incurs amortization of intangibles, included in its GAAP
presentation of amortization of software and acquired technology, and
amortization expense, related to various acquisitions it has made in recent
years. Management excludes these expenses and their related tax impact for
the purpose of calculating non-GAAP operating income, non-GAAP operating
profit margin, non-GAAP net income and non-GAAP diluted earnings per share
when it evaluates the continuing operational performance of the Company
because these costs are fixed at the time of an acquisition, are then
amortized over a period of several years after the acquisition and generally
cannot be changed or influenced by management after the acquisition.
Accordingly, management does not consider these expenses for purposes of
evaluating the performance of the Company during the applicable time period
after the acquisition, and it excludes such expenses when making decisions
to allocate resources. The Company believes that these non-GAAP financial
measures are useful to investors because they allow investors to (a)
evaluate the effectiveness of the methodology and information used by
management in its financial and operational decision-making and (b) compare
past reports of financial results of the Company as the Company has
historically reported these non-GAAP financial measures.
Stock-based compensation expense and its related tax impact. The Company
incurs expense related to stock-based compensation included in its GAAP
presentation of cost of software licenses, cost of maintenance and service,
research and development expense and selling, general and administrative
expense. Although stock-based compensation is an expense of the Company and
viewed as a form of compensation, management excludes these expenses for the
purpose of calculating non-GAAP operating income, non-GAAP operating profit
margin, non-GAAP net income and non-GAAP diluted earnings per share when it
evaluates the continuing operational performance of the Company.
Specifically, the Company excludes stock-based compensation during its
annual budgeting process and its quarterly and annual assessments of the
Company's and management's performance. The annual budgeting process is the
primary mechanism whereby the Company allocates resources to various
initiatives and operational requirements. Additionally, the annual review by
the board of directors during which it compares the Company's historical
business model and profitability as it relates to the planned business model
and profitability for the forthcoming year excludes the impact of
stock-based compensation. In evaluating the performance of senior management
and department managers, charges related to stock-based compensation are
excluded from expenditure and profitability results. In fact, the Company
records stock-based compensation expense into a stand-alone cost center for
which no single operational manager is responsible or accountable. In this
way, management is able to review on a period-to-period basis each manager's
performance and assess financial discipline over operational expenditures
without the effect of stock-based compensation. The Company believes that
the non-GAAP financial measures are useful to investors because they allow
investors to (a) evaluate the Company's operating results and the
effectiveness of the methodology used by management to review the Company's
operating results, and (b) review historical comparability in its financial
reporting, as well as comparability with competitors' operating results.
Acquired in-process research and development. The Company incurs in-
process research and development expenses when technological feasibility for
acquired technology has not been established and no future alternative use
for such technology exists. Management excludes these expenses and their
related tax impact for the purpose of calculating non-GAAP financial
measures when it evaluates the continuing operational performance of the
Company because these costs do not relate to the Company's ongoing
operations and generally cannot be changed or influenced by management at
the time of or after the acquisition. Accordingly, management does not
consider these expenses for purposes of evaluating the performance of the
Company during the applicable time period after the acquisition, and it
excludes such expenses when making decisions to allocate resources. The
Company believes that this non-GAAP financial adjustment is useful to
investors because it allows investors to (a) evaluate the effectiveness of
the methodology and information used by management in its financial and
operational decision-making and (b) to compare past and future reports of
financial results of the Company as the expense related to in-process
research and development is a one-time item recorded on the date of
acquisition.
Non-GAAP financial measures are not in accordance with, or an alternative
for, generally accepted accounting principles in the United States. The
Company's non-GAAP financial measures are not meant to be considered in
isolation or as a substitute for comparable GAAP financial measures, and
should be read only in conjunction with the Company's consolidated financial
statements prepared in accordance with GAAP.
Pursuant to the requirements of Regulation G, the Company has provided a
reconciliation of the non-GAAP financial measures to the most directly
comparable GAAP financial measures as listed below:
GAAP Reporting Measure Non-GAAP Reporting Measure
Revenue
Non-GAAP Revenue
Operating Profit
Non-GAAP Operating Profit
Operating Profit Margin Non-GAAP Operating Profit
Margin
Net Income
Non-GAAP Net Income
Diluted Earnings Per Share Non-GAAP Diluted Earnings Per Share
About ANSYS, Inc.
ANSYS, Inc., founded in 1970, develops and globally markets engineering
simulation software and technologies widely used by engineers and designers
across a broad spectrum of industries. The Company focuses on the
development of open and flexible solutions that enable users to analyze
designs directly on the desktop, providing a common platform for fast,
efficient and cost- conscious product development, from design concept to
final-stage testing and validation. The Company and its global network of
channel partners provide sales, support and training for customers.
Headquartered in Canonsburg, Pennsylvania U.S.A. with more than 40 strategic
sales locations throughout the world, ANSYS, Inc. and its subsidiaries
employ approximately 1,400 people and distribute ANSYS products through a
network of channel partners in over 40 countries. Visit
http://www.ansys.com for more
information.
--------
If news like this is important to you, sign up for our TenLinks Daily at http://www.tenlinks.com/NEWS/sub_unsub.htm.
Related News
Jan 17 - ANSYS Q4 Conference Call Feb 21, 10:30AM ET Jan 2 - ANSYS CEO to Present at Needham Conference Dec 4 - ANSYS Announces Distribution Extension with LSTC Nov 13 - ANSYS Named to Forbes 200 List Nov 2 - ANSYS Supports BMW Sauber F1 Team Oct 24 - ANSYS Announces SINDA/G Thermal Analyzer Plug In Oct 23 - ANSYS Named in Software Magazine's 500 List Oct 12 - Korea's SHI Selects ANSYS for Tankers, Vessels Oct 11 - ANSYS Q3 Conference Call Nov 1, 10:30AM ET Aug 29 - ANSYS CEO to Host at Kaufman Bros. Conference, NY Sep 5 Aug 9 - ANSYS 2nd on Baseline's Fastest Growing List Aug 8 - ANSYS Releases Airpak v3.0 for Airflow Modeling Aug 7 - Australia's Tenix Pty Standardizes on ANSYS Aug 6 - ITER Selects ANSYS for Nuclear Fusion Facility Design Aug 2 - ANSYS Reports Record Q2 Revenue $92M, with $18M Profit Jul 12 - ANSYS Changes Q2 Earnings Call to Aug 2 10.30AM ET Jun 13 - ANSYS to Present at NASDAQ 19th Investor Program in London May 22 - Michael Thurk Named to ANSYS Board of Directors May 15 - ANSYS in Baseline Mag's Top R&D Spenders List May 3 - ANSYS Reports Record Q1 Revenue $88M, with $16M Profit Apr 24 - ANSYS CEO Gets Diamond Award from Pittsburgh Business Times Apr 12 - ANSYS Q1 Earnings Call May 3 10:30AM Eastern Apr 11 - ANSYS Releases v3.0 of FLUENT for CATIA V5 Mar 29 - ANSYS Ships POLYFLOW 3.11 for Polymer Processing Mar 22 - ANSYS BladeModeler Integrates with PCA Vista CCD, CPD Mar 13 - ANSYS Annual Meeting of Stockholders May 16 2PM Mar 6 - ANSYS Releases Icemax v3.0 for IC Package Design Feb 26 - ANSYS Announces Simulation Solution v11.0 Feb 20 - ANSYS Reports Record Q4 Revenue $85M, FY06 Revenue $263.6M Jan 19 - ANSYS to Release Q4 Earnings Feb 20, 2007 Jan 03 - ANSYS CEO to Attend 9th Annual Needham Growth Conference
Source: Material used in press releases is often supplied by external
sources and used as is.
|